Hesco weldmesh Concertainer® Gabions

Introduction

 

Concertainer Gabions are wire mesh baskets formed by connecting individual panels of mesh with helical spirals on the vertical edge wires creating an open series of box compartments that fold in a concertina fashion to be flat packed. Lids and bases are sometimes supplied loose with helical spiral binders to connect the top and bottom of the open cells along one edge. Alternatively they may be factory fitted where practical for transportation purposes.

General information

Gabions are engineered retaining structures designed as mass gravity walls to hold back earth or other solid materials with out overturning, sliding or foundation failure. All designed, gabion walls should be checked by a suitably qualified structural engineer on site prior to construction.

The modular structure of these walls allows for variation in section to be accommodated as the height increases. The inherent strength of the units ensures structural and dimensional stability whilst a degree of flexibility accommodates ground movement and settlement where necessary.

Such structures are normally built at an inclination of 6 degrees and with a stepped front face depending upon individual requirements.

To facilitate the ease of filling and aesthetic appearance to the structure, the mesh fabric is available in a range of wire diameters to suit the given application.

It is common practice to vegetate gabion walls after construction with trailing plants placed at the toe, rear or on the steps of the wall.

 

Mass Gravity Wall

 

Nominal sizes of standard Concertainer Gabions

 

This table refers to the industry standard unit sizes; non-standard unit sizes are available in dimensions of multiples of the mesh opening.

Material Specification

Zincalu Super Coated 

 

Plastic Coated

 


 

Documentation 

Literature: Gabion Solutions.pdf 

Case Studies: Civil Engineering
                     Architectural

BBA Certificates: Roads & Bridges Cert No 99/R118
                        Building Regulations Agreement Certificate No 00/3683

Product Specifications:  Zincalu Super Coating
                                    3 mm Zincalu Super
                                    3 mm / 4.55 mm Facing Zincalu Super
                                    4.55 mm Zincalu Super
                                Plastic Coated
                                    2.70/3.20 mm Plastic coated on galvanised wire
                                    2.70/3.80 mm Face Plastic coated on galvanised wire
                                    3.80/4.30 mm Plastic coated on galvanised wire

Assembly Instructions:  Gabion.pdf

Book a CPD seminar: